Welcome to the HydroHoist Boat Lift site, there are 3 pages in this "micro site"
 HydroHoist |
|
| |
HydroHoist invented boat lifting!
|
|
Functions and benefits |
See it in action |
Models |
Installation |
Order Process
RNLI Atlantic 75 on EuroLift 34 with walkways instead of topfloats
|
The HydroHoist Range of BoatLifts are imported in to the UK and Ireland by Barnet Marine, we have been involved with the lifts since they first arrived in Europe in the late 1990’s and we are the market leaders in both supply of lifts and our experience of lifting craft in the UK
Barnet Marine and HydroHoist are pleased to announce that the RNLI are now using the EuroLift 34 exclusively under the Atlantic 75 lifeboat.
BOAT LIFTS ARE HERE TO STAY, GET ONE TODAY !
|
HydroHoist were issued the first US patent for any boat lift and thousands of the original "A" models are still in use today.
Utilizing over 30 years of design experience and a constant commitment to innovation, HydroHoist Engineers have provided the European Boat Owner with the ultimate in safe, simple, boat protection.
Two Melges Sailing Boats on EL 34 lifts in Torquay Marina
EL 34 lifts in Torquay Marina The sail boat model of lift has a deeper cross beam to allow the keel to pass over it
|
Radical design changes from the American HydroHoist “B” lift facilitate applications in narrow double mooring berths
The EuroLift model is designed to meet the needs of the European boating community, to provide maximum lift capacity in a minimum of space
|
Fletcher Sports Cruiser on EL 34 in Essex Marina
Here you can see how the top floats will actually protect the boat from hitting the pontoon when docking into a very tight space
|
Sea Pro Sports Fishing Boat on EL 34 in Essex Marina
|
|
Detail of the simplified new light weight EL 20 Lifts |
The EuroLift has been refined and developed in the 10 years that they have been sold in the UK, we now have continuous top floats to further protect your craft when mooring, an increased pump speed, improved mooring kits, 4 valve operation. The 1900 kgs lift model provides VERY affordable dry storage for even the smallest of craft. We have custom built several units for precise hull designs and we, the UK importers, work very closely with the American Factory in the design and build of specialist units.
Boat lifting in Europe is here and we are the number one !!
|
Chris Craft Launch on EL 34 in Ramsgate Marina |
|
The Front Mount option is a simpler and more basic lift without the walkways, suitable only for power craft it is a very cost effective lift option if you are on a finger pontoon, this lift is a bit more complicated in how it has to be fitted so please contact us to discuss this unit.
|
|
Functions
- Driving between the floats positions the boat over the EuroLift
- Open the valves and turn on the electric pump, housed in a secure box on the pontoon, this starts the lifting process
- The stern floats as the bow raises
- In less than two minutes the lift is raising the stern
- In little more than four minutes the boat is up, level and floating clear of the water.
- Reverse the process to lower the boat by opening the valves
- Automatically the lift begins to lower the boat to the water
- The stern floats as the bow lowers
- In less than two minutes the bow begins to float
- In little more than three minutes the boat is in the water and ready to go
|
Benefits
- Clean simple construction
- Hi-Tech Polyethylene materials
- Quick operation
- The boat is completely out of the water when not in use
- Safe secure mooring
- No more hull cleanings
- Decreased fuel consumption
- Easy to operate
- Uses the same space a typical boat does when moored
- Better residual value on your craft
|
Operation of the EuroLift model is simple.
Customer Requirements
- Minimal increase in total width over beam width of craft for mooring
- Mooring in any SIDE or STERN / BOW on location
- Wired to Euro CE Standards
- Four minute launch
- Simple to install and operate
- Priced on application for all boats
- Minimal service needs
Out of the water
|
Into the water
Meeting the Needs
- High Impact Polyethylene Tanks for maximum life
- Installed and assembled in one day
- Simplicity in mooring the unit to the pontoon makes moving the lift from berth to berth easy for one person
- Easily adjusted to allow other craft to be lifted
|
Available for boats up to 10,000 kg and larger. All types of boat from fin keel sail boats to open sports boats can be lifted. The width of the lift is TYPICALLY 70 - 100 cm wider than your boat.
| Model |
Capacity
(kg) |
#
of Pipes |
Length
(m) |
Diameter
(mm) |
|
SIDE MOUNT UNITS
|
|
EuroLift
20
|
2000
|
2 |
7
|
600 |
|
EuroLift
34
|
3400
|
4
|
7
|
600
|
|
EuroLift
40
|
4000
|
2 |
7.6 |
810
|
|
EuroLift
54
|
5400
|
2 |
7.6 |
810
|
|
EuroLift
68
|
6800
|
4
|
10 |
810
|
|
EuroLift 77
|
7700
|
4
|
10
|
810 |
|
EuroLift
86
|
8600
|
4
|
10 |
810
|
|
EuroLift
136
|
13600
|
4
|
On Application
|
On Application
|
|
FRONT MOUNT UNITS
|
|
Front Mount 20 |
2000
|
2
|
6
|
600
|
|
Front Mount 30
|
3000
|
2 |
6
|
810
|
|
Our experienced installation team install most lifts within one working day, we need the boat that is to be lifted to be on site so that we can adjust the lift to suit the craft. We need the operator of the lift to be there so that we can train them in how the unit works and we will need to have discussed in advance where the unit can be assembled, how we can get it in to the water (We have a specialised trailer that we assemble most lifts on and then launch the lift like a boat, if there is no convienent slipway then we will need to access a crane)
The unit is NORMALLY powered by 240 volt mains electricity and a supply is needed where the lift is to be used. We can also quote for generator based power supplies or inverters taking the power from the boat itself.
Because the lift submerges we need a depth of at least 1.4 m of water to be able to launch the craft of of the lift, and this may need to be more depending on the type of craft and the size of lift. We offer lifts that can dry out as well as units suited to swinging moorings (Link to Commercial and specialist lifts page)
|
Unit afloat and ready to be towed on to berth
|
EuroLift submerged and ready for boat to be driven on, we often need to do 2 or 3 test lifts when we first install the lift to get the unit perfectly adjusted for your craft
|
The vertical poles in their sliders just tie upto to your pontoon like a boat, normally no specialist mooring equipment is required. However in exposed or very rough sites the mooring mechanism may need to be upgraded and we often use chains to moor to the dock in instances like this.
|
Before you can place an order we need to quote you for the correct type of lift, please E mail us with the following information;
- Make and Model of Craft
- Type of Craft (Power, Sail, fixed or lifting keel, sterndrive, outboard or shaft drive)
- All Up weight
- Overall Length
- Overall Beam
- Location of marina
- Type of mooring (Drying, Marina, River, Swinging)
Once we have this detail we will come back to you quickly with a quote for your specific application. We carry a wide selection of lifts in stock and installation is usually within a couple of weeks of your order. We require a 20% deposit with order the balance being paid on the day of installation after we have shown you the unit working.
|
A top of the range 136 custom build lift with walkways and work platforms.
|
Barnet Marine Centre Ltd
14 West Burrowfield, Welwyn Garden City, Herts - AL7 4TW, UK
Telephone: +44 (0) 1707 331 389 Fax: +44 (0) 1707 331 383
E-mail info@ribs.co.uk
© Copyright 2001- AboarD / ABsite
Detail of the simplified new light weight EL 20 Lifts
Chris Craft Launch on EL 34 in Ramsgate Marina
